Gtechniq EXO V4 30ml Ultra Durable Hydrophobic Coating

Code: B07C4JQQ26


  • 18-24 months durability
  • Easy to apply
  • Adds gloss, water and dirt repellency


In Stock


Why use Gtechniq EXO?

EXOv4 delivers a hard film that makes water-spots easy to remove, offers great resistance to all wash chemicals and can help withstand micro-marring. It produces a high-gloss, warm-looking, extreme hydrophobic finish. It has a consistent film that is more durable and resistant to road salt and wash chemicals than its predecessors. Application is easy, with a slow flash-off time, giving more time to achieve a perfect finish. All of the above combined with the introduction of a good degree of swirl resistance means EXOv4 represents a major leap forward in Last Surface Protection (LSP) technology.

  • EXOv4 can be applied as a standalone sealant or as a top layer for Gtechniq C1 Crystal Lacquer or Gtechniq Crystal Serum Light  (CSL) – we recommend applying C1 or CSL as a base coat for easy to mark and dark paints
  • If you are applying over C1, EXOv4 should be applied a minimum of 4 hours, but less than 12 hours, after you finish the C1 application
  • If you are applying over CSL, EXOv4 can either be applied straight away starting the process at the same place you did with CSL. For best results wait two hours before applying to let the product flash-off longer
  • Ensure that your vehicle is out of direct sunlight but warmer than 5 degrees celsius, is completely dry and will stay dry for at least 12 hours after application
  • Wipe down all surfaces using Gtechniq Panel Wipe and a Gtechniq MF1 ZeroR Microfibre Buff Cloth (apply the Panel Wipe to the cloth and buff – not directly to the panel) – if you are applying over newly applied C1 or CSL, this step is not required
  • Shake the bottle well and wear gloves
  • Prime the AP2 Ultra Soft Foam Filled Applicator evenly with a good amount of product so that the pad is damp
  • Apply with applicator provided in overlapping strokes to a small panel or half a large panel. Wait 1 to 2 minutes after applying to a panel and buff with an MF1, followed by a second MF1 to remove any smearing, leaving the surface slick
  • Once you have finished coating your vehicle we recommend repeating the process starting from the same place as you did for the first layer and coating panels in the same order so that you coat your entire vehicle with two layers of EXO
  • Allow the coating to cure for at least 12 hours before getting wet
  • After application we recommend that you do not wash the car for at least a week
  • Store in a cool, dry place
  • Use within 3 months of opening

Gtechniq EXO Features

  • REPELS WATER AND DIRT: When you apply the EXO Ultra Durable Hydrophic Coating by Gtechiq, water contaminents will form droplets on contact with your vehicle’s bodywork, preventing, being absorbed and spread out across your car or SUV’s body panels, which can lead to a weakening of the integrity of your paintwork, or even worse, rust. This reaction also facilitate cleaning, as water beads up and rolls off the paintwork, it collects unwanted particles leaving behind a much cleaner surface
  • UNBEATABLE GLOSS: With Exo v3 ultra durable hydrophobic coating (UDHC) sealant by Gtechniq, you’ll also notice that your vehicle is shiny and glossy with a sleek finish that provides unbeatable durability for up to 18 to 24 month and will provide resistance to road salt and wash chemicals, unlike most other competitors. Enjoy a car that looks like new again with a simple application of Gtechniq’s UDHC coating
  • TRIED & TESTED FORMULA: Here at Gtechniq, we’re always looking to improve our products for your satisfaction and to help you get the most out of your vehicle, which is why our products go through rigorous laboratory and real world tests to deliver optimum performance of EXO UDHC. Our hydrophobic coating offers unbeatable durability, chemical resistance and resistance to surface staining (particularly from water spots), as well as retaining that warm gloss finish
  • EASY TO APPLY: With your purchase, you’ll receive your Gtechniq Ultra Durable Hydrophic Coating with clear and concise instructions for a successful application. It can be applied as a standalone protection product, or as a top layer over Gtechniq’s C1 Cyrystal Lacquer or Crystal Serum Light for optimum protection. Find our videos online with detailed guides for best results, and ensure that the bottle stored in a dry place and is used within 3 months after opening


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.